This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

SHIP NEXT DAY (NO ISSUES) Colonial American Longrifle Kit +$315 for Lock - Billed Separately. Stock #1592

$1,030.00

.54 Caliber Rifled - Already boxed up 

Fancy sugar maple stock with wide curl, has some light staining but it will not show.

Kit is being sold at the fancy maple price.

Description

  • Styling from the 1760’s -1770’s
  • Representative of rifles produced in many of the colonies during this time period.
  • Stock has a pull of about 13 5/8” and a drop of approximately 2 3/4” and cast off of approximately 3/16"
  • Available in curly maple, walnut or cherry wood or provide your own stock (2 1/2" by 60" by 7" minimum blank size)
  • Buttplate is approximately 2” in width and slightly over 5” in height.
  • Brass mounted
  • 43.25” custom profiled barrels. Breech 1.125” and waist approximately .800”.   A very nice contoured barrel.  It comes standard in square bottom rifling.  
  • Kibler's CNC Round Faced English Flintlock
  • Available with or without a sliding wood patchbox (no additional charge)
  • Set up for a single trigger.
  • Stock CNC machined for extremely close tolerances and fine surface finish
  • All holes drilled in the stock.
  • Minimal work required for part fitting.
  • Barrel has all sight dovetails cut, the underlugs are machined into the barrel, and the barrel is drilled and tapped for a White Lightning style touch hole liner which will come pre-installed
  • Breech plug/tang is fully machined, shaped, and installed
  • Comes with all parts necessary to complete the rifle
  • Right hand only
  • A very precise and well-designed kit with beautiful lines and styling.

Included parts

  • Stock
  • Barrel
  • Lock
  • Trigger and plate
  • Touch hole liner
  • Buttplate
  • Trigger Guard
  • Entry pipe
  • Two forward ramrod pipes
  • Nose cap
  • Side plate
  • Underlugs
  • Ramrod
  • Ramrod tip
  • Front and rear sights
  • Lock bolts
  • Tang bolt
  • Wooden Sliding Patchbox Lid
  • Box lid catch spring
  • Pin stock
  • Buttplate screws
  • Prices do not reflect the price of $300 lock which we will bill separately after your order. After you place your order, you will get an email with instructions on how to pay for your lock. (By separating the billing we are able to avoid excise tax complications.)

Shipping typically runs around $60-$100 but varies based on location. 

In the white

  • This service is available as an add on to a kit gun order.  This is $700 for this service.

    A gun provided "in the white" will be completely assembled and functional.  The wood will need sanded and finished.  The metal will also benefit from some cleanup.  This is typically a little light filing on the rough spots followed by a little polishing with abrasive paper.  The metal can be left in this condition or can be blued, browned, aged etc. 

    Your kit will arrive assembled, ready for you to customize and finish.

Finished rifles

We recommend the work of talented and experienced gunsmith, Chuck Edwards, for those who would like additional finishing work done on their Kibler Rifle.  He can be reached at (573) 421-5098 and his online page is found on Facebook.  He has finished out many Kibler rifles and does fantastic work.  The pricing will vary depending on the work and should be discussed with Chuck.

 


SHIP NEXT DAY (NO ISSUES) Colonial American Longrifle Kit +$315 for Lock - Billed Separately. Stock #1592

$1,030.00

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Daniel in Alberta Canada
My first kit build

Great customer service, I had an afterthought and wanted to add something to my order so I used the webstore chat and the item was easily added into my order.
The kit arrived safely and well packaged, nothing short of a miracle considering the distance it had to travel to northern Alberta Canada!!!
Hassle free shipping, I’ll mention it again, I’m in Canada, I paid the invoice, my Colonial kit was shipped directly with no notable hang up at Customs, shocking but true it is just that easy.
The kit itself was very straight forward to assemble, the parts fitment is impressive with very little material removal for the inletting.
If you go for a Colonial kit try and find a jewellers saw, it is very awkward to slot the barrel lugs without one!
All total I’m roughly 30-40hrs into building and finishing the rifle and it was an extremely rewarding project, I will be ordering SMR for my missus next!

J
Jesse Shively
Stoked

Coolest project ever can’t wait for spring bear

Shipping

Liquid Shipping

Liquids will not ship in the kit box. There are different regulations that apply to the chemicals that we sell and they will need to ship ground, when the kits will ship USPS Priority Mail. Plus, it would really stink if a liquid were to leak on your beautiful new kit!

Order tracking

You will receive tracking information when your item ships. For kits, you will be contacted before shipment and after shipment so there is no need to worry about a kit box shipping when you are out of town. All other packages will ship when available and you will be emailed a tracking link.

Get in touch

If you have questions, feel free to email us at info@kiblerslongrifles.com or give us a call at 330-551-5844. Even if you have to leave a message, we promise to get back with you right away. Bree can answer most questions and she will be sure to ask Jim when needed.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Daniel in Alberta Canada
My first kit build

Great customer service, I had an afterthought and wanted to add something to my order so I used the webstore chat and the item was easily added into my order.
The kit arrived safely and well packaged, nothing short of a miracle considering the distance it had to travel to northern Alberta Canada!!!
Hassle free shipping, I’ll mention it again, I’m in Canada, I paid the invoice, my Colonial kit was shipped directly with no notable hang up at Customs, shocking but true it is just that easy.
The kit itself was very straight forward to assemble, the parts fitment is impressive with very little material removal for the inletting.
If you go for a Colonial kit try and find a jewellers saw, it is very awkward to slot the barrel lugs without one!
All total I’m roughly 30-40hrs into building and finishing the rifle and it was an extremely rewarding project, I will be ordering SMR for my missus next!

J
Jesse Shively
Stoked

Coolest project ever can’t wait for spring bear

Cart