QUICK SHIP Kibler Fowler Kit +$315 for Lock Billed Separately - #2438
16 Gauge - Already Boxed Up
Fancy walnut stock with less than ideal grain through the wrist. Would have been $100 above the walnut price.
Kit is being sold at the walnut price.
Fowler
- Styling from the 1760's - 1770's
- Based on smooth bores produced in England and exported to the Colonies during this time period. These were often sold at general stores and were some of the most common firearms of the period.
- Classic English Design
- Perfect gun for re-enactors
- Available in 16 or 20 gauge (20 gauge is recommended for shooting round ball)
- Length of pull is 13 5/8"
- Overall length is about 60"
- Set-up for a single trigger
- Includes a thin-walled and light weight 3-Stage Barrel - round forward section followed by a shorter round section of larger diameter and finally an octagon breech.
- The front sight and pre-drilled underlugs will be soldered onto the barrel. No rear sight.
- Kibler's highly dependable and fast, CNC Round-Faced English Flintlock
- Brass hardware including a relief cast thumb piece.
- CNC machined stock for extremely close tolerances and fine surface finish, embellished with a relief shell carving around the tang, as well as relief lock moldings and beaver tails.
- Walnut stock wood is encouraged, however, it will also be available in maple and cherry.
- All holes drilled in the stock.
- Minimal work required for part fitting.
- Breech plug is fully machined and shaped.
- Comes with all parts necessary to complete.
- Right-handed only at this time.
- A very precise and well-designed kit with beautiful lines and styling.
INCLUDED PARTS
- Stock
- Barrel
- Lock
- Brass thumb piece
- Trigger and plate
- Touch hole liner (installed in barrel)
- Buttplate
- Trigger Guard
- Entry pipe
- Two forward ramrod pipes
- Side plate
- Ramrod
- Ramrod tip
- Front sight (soldered onto barrel)
- Lock bolts
- Tang bolt
- Pin stock
- Buttplate screws
Customer Reviews
The packaging is phenomenal first off. And As for the kit it is so refined and well fitted that anyone should be able to complete one if they take their time and watch what they’re doing. As far as functionality I have no problem keeping .595 and .600 patched round ball in 3” groups at 50 yards. It also shoots .610 bare ball if you use a nitro card over the powder and a fiber wad lubed with lamb talo or comparable lube the ball and then over shot card may even shoot better. I ran out of .610 balls so the jury is still out on that but will be revisited in short time. I purchased this to be used so I finished it in a traditional rust blue. I am still experimenting with different fine-shot loads with the cylinder bore. But with 70 grains of my homage FF powder 1-1/4 oz shot and loading with modern techniques using nitro card fiber wad and over shot card I have taken several squirrels. I know it not traditional loading but when hunting I respect the game and try to keep shots at 30 yards or less. I will be using it to take a deer in the near future. Since purchasing I also bought a SMR in cherry also in 36 caliber.
It is not completed yet but am working on it now and will review it once it’s complete. I hope this is helpful to someone.
Thanks Chris
His detail on these kits I have never had before. It shows he believes in making some of the best kits ever. I’m working on my third one this year and would highly suggest seeing his YouTube videos. I’ll be buying a fourth next year!
My advice is to quickly mail down a quick ship opportunity or it will be gone immediately. The Fowler turned out perfectly fit and a beautiful antique cherry finish. Service was seamless. Thanks.
William E. Greenlee
Louisville, KY
Shipping
Liquid Shipping
Liquids will not ship in the kit box. There are different regulations that apply to the chemicals that we sell and they will need to ship ground, when the kits will ship USPS Priority Mail. Plus, it would really stink if a liquid were to leak on your beautiful new kit!
Order tracking
You will receive tracking information when your item ships. For kits, you will be contacted before shipment and after shipment so there is no need to worry about a kit box shipping when you are out of town. All other packages will ship when available and you will be emailed a tracking link.
Get in touch
If you have questions, feel free to email us at info@kiblerslongrifles.com or give us a call at 330-551-5844. Even if you have to leave a message, we promise to get back with you right away. Bree can answer most questions and she will be sure to ask Jim when needed.
Customer Reviews
The packaging is phenomenal first off. And As for the kit it is so refined and well fitted that anyone should be able to complete one if they take their time and watch what they’re doing. As far as functionality I have no problem keeping .595 and .600 patched round ball in 3” groups at 50 yards. It also shoots .610 bare ball if you use a nitro card over the powder and a fiber wad lubed with lamb talo or comparable lube the ball and then over shot card may even shoot better. I ran out of .610 balls so the jury is still out on that but will be revisited in short time. I purchased this to be used so I finished it in a traditional rust blue. I am still experimenting with different fine-shot loads with the cylinder bore. But with 70 grains of my homage FF powder 1-1/4 oz shot and loading with modern techniques using nitro card fiber wad and over shot card I have taken several squirrels. I know it not traditional loading but when hunting I respect the game and try to keep shots at 30 yards or less. I will be using it to take a deer in the near future. Since purchasing I also bought a SMR in cherry also in 36 caliber.
It is not completed yet but am working on it now and will review it once it’s complete. I hope this is helpful to someone.
Thanks Chris
His detail on these kits I have never had before. It shows he believes in making some of the best kits ever. I’m working on my third one this year and would highly suggest seeing his YouTube videos. I’ll be buying a fourth next year!
My advice is to quickly mail down a quick ship opportunity or it will be gone immediately. The Fowler turned out perfectly fit and a beautiful antique cherry finish. Service was seamless. Thanks.
William E. Greenlee
Louisville, KY
