QUICK SHIP Southern Mountain Rifle Kit +$330 for Lock - Billed Separately. Stock #3214
.40 Caliber - Already boxed up
Fancy maple stock with a repair by the butt plate.
Kit is being discounted $30 from the fancy maple price.
Payment Portal for $330 Ketland Lock to Ship with Kit
Description
- Styling from the 1820s based on the work of Whitson in western North Carolina
- Stock has a pull of about 13.75” and a drop of approximately 3 5/8” and no cast off
- Available in curly maple, walnut or cherry wood or provide your own stock (2 " by 61" by 7" minimum blank size)
- Buttplate is approximately 1.375” in width and 4.5” in height.
- Iron mounted
- 44” custom profiled barrels. Breech .938” and waist approximately .700”. A very nice contoured barrel. It comes standard in square bottom rifling.
- Kibler's CNC Ketland Flintlock
- Kibler's CNC machined double set triggers.
- Stock CNC machined for extremely close tolerances and fine surface finish
- All holes drilled in the stock.
- Minimal work required for part fitting.
- Barrel has all sight dovetails cut, the underlugs are machined into the barrel, and the barrel is drilled and tapped for a White Lightning style touch hole liner which will come pre-installed
- Breech plug is fully machined and shaped and comes fit and installed
- Comes with all parts necessary to complete the rifle
- Right hand only.
- A very precise and well-designed kit with beautiful lines and styling.
Included parts
- Stock
- Barrel
- CNC Ketland Lock
- Kibler Double Set Trigger
- Touch hole liner
- Buttplate
- Trigger Guard
- Ramrod Pipes (3)
- Lock bolt washer
- Underlugs (4)
- 5/16 Hickory Ramrod
- Tapered Ramrod tip
- Front sight
- Rear sight
- Lock bolt
- Forward Tang bolt
- Rear Tang bolt
- .037" Pin stock
- Buttplate screws
In the white
-
This service is available as an add on to a kit gun order. This is $700 for this service.
Your kit will arrive assembled, ready for you to customize and finish.
Finished rifles
We recommend the work of talented and experienced gunsmith, Chuck Edwards, for those who would like additional finishing work done on their Kibler Rifle. He can be reached at (573) 421-5098 and his online page is found on Facebook. He has finished out many Kibler rifles and does fantastic work. The pricing will vary depending on the work and should be discussed with Chuck.
I am very please with SMR. It went together easily. Barrel tang fit was perfect in walnut stock. Though it had minor chip on the fore end. I put a brass nose cap on it. I really like it. Be patient in fitting butt This is a very fine smoke pole.
kit was beyond reproach , it went on sale befor it even left your facility and I was not offered this discount. pissed!
Kibler Longrifles works hard to deliver a quality product at a reasonable price. Even for experienced gunsmiths Kibler gives minimum assembly time and there more time to devote to carving, inlays, wire work, and finishing. With a Kibler kit there is only minor fitting issues. A little chisel work, a few strokes of a file, and fixing a miniscule ding is all that is needed. Watch Jim's videos and you'll have no aggravation and no elevated blood pressure.
This is my second kibler build after doing a Woods Runner previously. For this Southern Mountain build I was fortunate enough to obtain an above grade extra fancy maple stock and the curl is outstanding. As usual, the Kibler manufacturing of hardware is close to perfection, and the inletting required little if any fine tuning. I have purchased both of my rifles from the quick ship section of the website, and I will purchase my third using this method as well as I feel that I have some choice in the look of stock I want. The pictures provided in the quick ship section give a good indication of what you will be receiving. The operation of kibler rifles is excellent, and the time spent building, finishing and using a Kibler kit brings hours of enjoyment and the end product is something which I will be proud to pass on to my children and their children.
I bought this rifle in curly maple at a discount due to a curvature in the forearm area which was no problem at all in finishing the kit. The figure in the wood is just great, standard grade but wow, I've taken pictures to send along but am having trouble in getting them on the computer, I'll try to send them on the phone.
This is my 4th kit that I've bought from Kibler's and am always pleased, try building from another oufit!
Shipping
Liquid Shipping
Liquids will not ship in the kit box. There are different regulations that apply to the chemicals that we sell and they will need to ship ground, when the kits will ship USPS Priority Mail. Plus, it would really stink if a liquid were to leak on your beautiful new kit!
Order tracking
You will receive tracking information when your item ships. For kits, you will be contacted before shipment and after shipment so there is no need to worry about a kit box shipping when you are out of town. All other packages will ship when available and you will be emailed a tracking link.
Get in touch
If you have questions, feel free to email us at info@kiblerslongrifles.com or give us a call at 330-551-5844. Even if you have to leave a message, we promise to get back with you right away. Bree can answer most questions and she will be sure to ask Jim when needed.
