Cannot ship outside continental United States. Must ship surface transportation only.
Specially formulated to bring out the rich beauty and figure of any wood.
DEEP PENETRATING - Designed to penetrate deep into wood so surface scratches, abrasion and other wear damage will not expose raw, unstained areas.
NON-GRAIN-RAISING - Suppled in a special solvent blend that will not swell grain, checkering, carving or tight inletting.
LIGHT FAST - The dyes used in Antique Wood Stain are metal complexed solvent soluble dyes. These dyes are exceptionally light fast and in many cases are more light fast than pigmented stains.
FINISH COMPATIBILITY - Antique Wood Stain can be added directly to Laurel Mountain Forge's Permalyn Finishes. This is especially useful when refinishing worn areas or in restoration work.
RICH COLORS - Will enhance the grain and figure of all woods. Adds depth and clarity that can't be obtained with pigment type stains. All colors of Antique Wood Stain can be intermixed to obtain additional colors.
CONCENTRATED - Antique Wood Stain is concentrated making it economical to use. One 4 oz. bottle will stain many stocks. It can be reduced to obtain lighter shades for even more economy.
MAPLE – Amber color with red undertones. Popular 18th – 20th century American Stock color. When used on walnut stocks, stain has stronger red undertones than Walnut Stain. Produces an exceptionally fine color on English walnut.
HONEY MAPLE - On light colored woods such as maple, this stain will color wood an overall rich honey color. Any figure or grain pattern will be stained a darker amber-brown. Honey Maple has less red under tone than Maple Stain. This color was popular in Lebanon and York county Pa. in the 18th and 19th centuries.
CHERRY – Deep, rich red-brown color. Brings out red undertones when used on cherry or any other wood. Duplicates the color of 18th and 19th century firearms from Lehigh and Northampton county PA., when staining maple. Matches the classic red-brown used on high quality European firearms, when used on walnut. Color similar to that obtained with the natural stain alkanet root, but with the exceptional light fastness characteristic of all Laurel Mountain Forge Stains.
**These are actual photographs of Antique Wood Stain applied to samples of highly figured hard curly maple. Due to variations in color calibration between computer monitors, these samples are only meant to be general representations.
Prior to application of Antique Wood Stain, make sure the stock surface is smooth, clean and dry. For final sanding we like to use 320 grit paper. Once you think the stock is perfectly smooth, look at the stock once again with a bright spot light shining on the surface at a low angle. Doing this final check in a darkened room helps to pick out any surface irregularities. If you are satisfied with the surface smoothness the next step is to vacuum the stock thoroughly. Any areas of checkering or incised carving should be gone over carefully with a fine, soft-bristled brush to remove any residual sanding dust.
Before applying Antique Wood Stain to any stock, we like to stain up a scrap piece of wood from the stock we are working on. This is to determine if the color will be what we wanted. Discovering you selected the wrong stain color for your stock is the wrong thing to find out after completely staining your stock! To prepare the stain block, just use any left over wood from the stock blank. If you used a precarved stock, just use the inside of the barrel channel. Don’t judge the color after the stain has dried, without applying either some finish or sealer to the surface. Since Antique Wood Stain is a dye based stain, once the carrier solvents have evaporated, the stock will look dull and lifeless. It is only after the stock has been rewet with finish, that the true final color comes back. When you are satisfied with the color, its time to stain for real. Just remember that any of the Antique Wood Stain colors can be blended to achieve almost any final color you desire.
For final application to the stock, apply a liberal coat of stain, using a brush or lint free cloth. We like to use cheap disposable natural bristle brushes. A cloth works also, but tends to be messier. If you are going for a darker, more intense color, use Antique Wood Stain full strength. Dilute with Laurel Mountain Forge Stain Reducer or denatured alcohol for lighter tones. If you use denatured alcohol for dilution the degree of penetration will be reduced somewhat due to the fast evaporation rate of alcohol. When applying Antique Wood Stain, try to keep the application as uniform as possible to keep the color uniform. Multiple coats of Antique Wood Stain will yield a darker color, better penetration and more uniform color. On darker colored, open grained woods, such as walnut, a 25% stain to 75% reducer is a good starting point. For fined grained, light colored dense woods such as maple either use full strength or dilute 25%.
After staining your wood, allow to dry at least 4 hours before applying a finish. We recommend using high performance coatings such as our Permalyn Gun Stock Finish and Permalyn Sealer, for long lasting protection.
I purchased this stain to finish a Ky flintlock pistol kit. The wood was walnut, the stain maple. Once the stain had dried, I realized it was very red. I wanted more of a brown color to enhance the wood grain.
Love it, finished with unstuck oil after the stain
I used 2 coats of the Honey Maple stain then topped with 3 coats of their Permalyn Sealer on my 1962 Winchester model 88. Looks very nice.
Beautiful both maple and the honey maple stainef worked very well on my colonial rifle. Would buy again but there is plenty left over for my next rifle!
awesome product - easy to use - great results